ETC Pask Permeameter Kit

ETC-Complete-Pask-Kit-2015The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. (ETC).

The concept for the Pask Permeameter was originally developed by David Pask, formerly of the Nova Scotia Dept. of Environment, and is a convenient and much less expensive alternative to the Guelph Permeameter®. The test procedure is based on the constant head well permeameter method (CHWP) described by Reynolds (2008) and by Elrick and Reynolds (1986).

ETC has prepared an updated, user-friendly guide which incorporates the research by Reynolds, Elrick and others. An abbreviated version of ETC’s User Guide has been incorporated into the new CSA B65-12 Installation Code for Decentralized Wastewater Systems and also the New Brunswick Department of Health’s Technical Guidelines for On-site Sewage Disposal Systems. 

Our permeameter kit works with almost any soil type from loams and sands to clays, even built-up beds of imported septic fill or compacted clay liners for lagoons and landfills. It can also be used for the design of stormwater management systems.  Our permeameter was recommended by Kimley-Horn for the assessment of large infiltration water quality BMPs to assess the BMP condition.

Advantages of ETC Pask Permeameter Kits:Pask-Field-2014

  • Much more accurate and repeatable method of assessing the soil’s drainage properties than the percolation test.
  • Unlike others, we use clear lightweight, and durable polycarbonate for the upper reservoir, rather than heavier SCH40 pipe. This makes our permeameter extremely light, minimizing the potential for it to sink into the soil and cause errors.
  • NEW! Our permeameter features a custom designed ABS cap with a secure, stainless steel clip. No more concerns about losing rubber stoppers in the bottom of the well holes!
  • Very fast – a test on most soils can usually be completed in only 15 to 45 minutes.
  • Small amount of water needed, typically 0.5 usgal (2 Liters) per test.
  • Very visual; easy for homeowners to see how it works, and whether they have “good” soil or not.
  • High quality, durable soil auger (manufactured by industry leader Eijkelkamp) helEijkelkamp Agrisearch Equipmentps to ensure the well hole is of the proper shape with a flat bottom.
  • Calculations are made easy using ETC’s Quick Reference Tables.
  • Constant head of water created by the ETC permeameter helps to minimize the impact of errors caused by improper soil characterization (estimation of α*).

The ETC Pask Permeameter Kit includes the following:

  1. ETC Pask Permeameter with custom ABS cap and stainless steel clip
  2. High quality Eijkelkamp Riverside auger
  3. Custom twisted wire brush
  4. ETC Quick Reference Field Calculation Tables
  5. Pask Permeameter User Guide

Visit the Dynamic Monitor’s on-line store to purDynamic Monitorschase. Or contact us over the phone or through email for volume pricing on kits or individual components.

Leave a comment below if you have any questions, or contact us 1-888-747-7645 (SOIL).

2 Responses to ETC Pask Permeameter Kit

  1. Jean-Louis Bastien April 16, 2014 at 5:06 pm #

    Hello, my name is Jean-Louis Bastien, I work at the Cégep de Joliette in civil engineering. One of my students told me about the ETC Pask Permeameter Kit. We would like to try this permeameter in our laboratory . I wanted to know if it was possible to help you research this device also.

    thank you very much

    Jean-Louis Bastien

    Bonjour, je m’appelle Jean-Louis, je travaille au cégep de joliette en génie civil. L’un de mes étudiants m’a parlé du Perméamètre Pask. Nous aimerions essayer ce perméamètre dans l’un de nos laboratoires. Je voulais savoir si c’étais possible de vous aider dans la recherche sur cette appareil également.

    Merci beaucoup

    Jean-Louis Bastien

  2. Johnatan Doucet May 27, 2013 at 9:20 am #

    I want a Pask Constant Head Permeameter Kit. It’s possible to delivery to Québec for the next week? I see on your site the order form. I just need to complete the form and you ship a kit?

    Have a good.

    Johnatan Doucet
    Ingénieur forestier

Leave a Reply to Jean-Louis Bastien Click here to cancel reply.